User Manual

6. Image Adjustment: applicable only for VGA input signal
● Press
to launch the OSD panel.
● Press or to select , press to enter.
● Press or to select the sub-menu, press
to enter, press or to adjust
Clock → Adjust the horizontal scan rate. If the rate is
incorrectly set, the vercal lines on screen and screen
width will not be properly displayed.
Phase → Adjust the phase of pixel clock signal. If the
posion is incorrectly adjusted and when the screen
displays bright image, it will be aected by horizontal interference.
Sharpness → Adjust the sharpness of the image.
H Posion → Adjust the image’s horizontal posion.
V Posion → Adjust the image’s vercal posion.
● Press
to exit.
7. Menu Adjustment
● Press
to launch the OSD panel.
● Press or to select , press to enter.
● Press
or to select sub-menu, press to
enter, press or to adjust.
OST Timer → adjust OSD me
Language → select language
Reset → restore to factory sengs
Version → factory version
● Press
to exit.
8. Signal Selecon
● Press
to launch the OSD panel.
● Press
or to select , press to enter.
● Press or to select sub-menu, press to
enter, press or to select input source,
which are:
VGA → select Analog signal as source of input
DVI → select Digital signal as source of input
Auto Search → auto search for input signal
● Press to exit.
18