User Manual

Section 1 Hot Keys Description
Power: press power switch to switch o power.
Exit: when there is no OSD menu; pressing the
exit buon will acvate automac adjustment
funcon (only pertains to Analog video signal
VGA).
Menu/Select: press menu buon to launch
OSD panel.
Increase brightness/move up: press to
increase brightness; if the OSD menu is launched, pressing will move up the list.
Press and hold for automac connuous increase.
Decrease brightness/move down: press to reduce brightness; when the OSD
menu is launched, press to move down the list. Press and hold for automac
connuous decrease
Section 2 OSD Description
1. Basic Buons operaon
● Press buon to launch the OSD panel.
● Press
or to view the funcons. To
adjust a specic funcon, press to
launch it. If the selected funcon consists
of sub-menu, press or again to
view the sub-menu. When the desired
funcon is highlighted, press to launch it.
● Press
or to change the sengs. To exit, press to exit. Repeat the
preceding steps to adjust other sengs.
Chapter 5 Hot Keys and OSD Instructions
Note: The hot keys are capacive sensing buons which are acvated by gentle touch-
ing. DO NOT press too hard or too fast in a connuous manner. Repeated pressing of a
buon will cause the buon responding slow. For connuous adjustment of "Increase/
Up" or "Decrease/Down", press and hold the corresponding buon for automac con-
nuous increase/decrease.
2. Color seng - Contrast
● Press
to launch the OSD panel.
● Press
or to select , press to enter.
● Press
or to select Contrast sub-menu and
press to enter; press or to proceed
with the contrast adjustment → adjust the display
contrast from 0-100.
● Press
to exit.
16