User Manual

Step4.Adjust the laptop and monitor extension setting

(Refer to Secon 2 of Chapter 3 for monitor

display seng.)

Aer powering on the laptop, go to Windows’

"Control Panel" to adjust the monitor exten-

sion seng. If you are using Windows 7:

Select "2.DVI LCD" (Digital Video) or “2. display

device: VGA” (Analog Video) for Display

Select "1366x768" for Resoluon

Select "Landscape" for Orientaon

Select "Extend these displays" for Mulple

displays, and drag Display 2 to the right side of

Display 1.

Step5.Remove Mobile Monitor from the laptop

1. Remove the Mobile Monitor from the laptop.

As illustrated, rotate clockwise and open the Mobile Monitor, press on the posi-

oning clip, and pull forward the Mobile Monitor along the Holder Plate to slide

out the sha’s Hinge Plate.

Fig.: Press on the posioning clip to slide

out the sha’s Hinge Plate from the Hold-

er Plate.

Section 5 Remove Mobile Monitor’s Holder Plate

1. First, remove the Mobile Monitor

2. Insert a ruler or rigid at arcle into the gap at boom of the Holder Plate; gently

and evenly apply force back and forth to make the double-sided adhesive tape lose

its viscosity. Do not use metal objects that can easily scratch the surface.

[Note: DO NOT try to li up the Holder

Plate directly with hands as it may result

in deformaon of the Holder Plate for

reuse.]