Operation Manual

Downloaded from www.vandenborre.be

When the anti-cal cartridge indicator blinks on the LCD, replace

the cartridge. If a new cartridge is unavailable, you may use

distilled water instead of tap water to continue operating the

appliance.

1. Slide out the water tank and anti-cal cartridge container.

 will flash on the LCD.

2. Replace the new anti-cal cartridge and water tank.

NOTE: If anti-cal cartridge is missed or not properly installed, will flash and

beep sounds continuously when pressing the steam button.

AFTER IRONING

. Turn off the appliance by pressing the power ON/OFF

button.

2. Slide out the water tank.

3. Remove the water inlet cover then empty the water as

shown.

4. Close the water inlet cover and replace the water tank.

AUTO SHUT-OFF

Auto shut off function will be activated if the appliance is not in operation for over 10

minutes. LCD backlight goes off with a beep heard and will blink. Press the power

ON/OFF button to switch on the appliance.

CLEANING

Please note: before cleaning the appliance in any way, make sure that the

appliance plug is not connected to the mains socket.

Any deposits, starch residue left on the plate can be removed using a damp cloth or

an unabrasive liquid detergent.

Avoid scratching the plate with steel wool or metallic objects.

The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.

STORING

- Disconnect the plug from the mains socket.

- Leave the appliance to cool down completely.

- Empty the tank.

- Leave the appliance to cool down completely.

- Roll up the power cord.