Operation Manual

5
2. Switch the power to “ON” to turn on the unit.
3. The pre-stored opening screen displays in a loop sequence after the power is turned on.
4. To stop it, press
.
SELECTING A PREFERRED OSD LANGUAGE
The SETUP logo will appear when the power is turned on.
1. Press
to show the main menu.
2. Use
/ to highlight the “General Setup” option.
3. Press
to enter the option.
4. Use
/ to highlight the “Language” option then press to enter it.
5. Use
/ to select the desired language.
6. Press
to confirm and then press twice to return to the main menu.
Downloaded from www.vandenborre.be