Operation Manual

PARTS
USING THE KETTLE
Before first use, fill the kettle with fresh water up to the maximum level and let
the water boil once, pour out the hot water and rinse the kettle once more.
Boil-dry protection
This kettle is equipped with boil-dry protection. This kettle is automatically
switched off and the power light goes off if it is accidentally switched on when
there is no water in it. Allow to cool down for 15 minutes before refilling cold
water.
Make sure the kettle is switched off and unplugged from the power socket.
1. Remove the kettle from the base. Fill the kettle with desired amount of
fresh water either through the spout or through the open lid.
y The water amount ranges from the minimum amount 0.75L to the
maximum amount 1.7L.
y Open the lid by pushing the lid handle.
4
Downloaded from www.vandenborre.be