Operation Manual

Downloaded from www.vandenborre.be
This refrigerator has been built with the door hinges on the right. If you wish
to change the opening direction, follow the instructions below:
2. R emove the two s crews (1) that hold the uppe r hinge (5) (right s ide) to the
Fridge body. Remove the upper hinge (5).
3.Lift the door and place it on a padded surface to prevent scratching it.
4. R emove the two s crews (8) that hold the lower hinge(2) and remove
the lower hinge(2).
5. R emove the left front foot (4) a nd tra ns fe r it to the right s ide .
6. R everse theholecoverplate(7)from the left side to the right.
7.
Before fitting the lower hinge (2), remove the hinge-pin (9) and reverse
the direction of the lower hinge (2). T hen install the lower hinge (2) onto
the le ft s ide of the lowe r fra me with two s cre ws (8).
9. position the door in place making sure the door seats onto the lower hinge(2)
10.While holding the door in the closed position secure the upper hinge (5) in the
top fra me on left s ide with two s crews (1). Remember, do not tighten
the two screws (1) until the top of the door is levelled with the top of the fridge.
Changing the reversible door
1. R emove the upper hinge cover (6) first
11. Install the upper hinge cover (6) and the hole cover plate (7) on the upper hinge.
8. Insert the hinge-pin (9) to the lower hinge (2).
6