Operation Manual
EN - 12 -
BEFORE CALLING YOUR AFTER SALES SERVICE PART - 7.
If your refrigerator is not working properly, please check the following before calling for help.
Yourapplianceisnotworking.
Checkthat;
• The appliance is plugged in.
• The general switch in your home is not disconnected.
• Thevoltageissufcient.Tocheckthis,pluginanotherappliancethatyouknowwhichis
working into the same socket.
Your appliance performs poorly.
Checkthat;
• You have not overloaded the appliance ,
• The thermostat is not set to position "1" (if it is, you will have to set the thermostat to a
suitable value)
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
Your appliance is noisy when operating.
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling
sound) even when the compressor is not running. Do not worry this is quite normal. If these
soundsaredifferentcheckthat;
• The appliance is correctly levelled.
• Nothing is coming in contact with the rear of the appliance.
• The stuffs on the appliance are not vibrating.
There is water in the lower part of the refrigerator.
Checkthat;
The drain hole for defrost water is not clogged(Use defrost drain plug to clean the drain hole)
Yourapplianceisnotcoolingsufciently.
Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated on the rating label. Operating your appliance
outside the stated temperatures is not recommended.
Climate class
Ambient Temperature (
o
C)
T Between 16 and 43
o
C
ST Between 16 and 38
o
C
N Between 16 and 32
o
C
SN Between 10 and 32
o
C
This appliance is designed for use at an ambient temperature within the 16°C - 32°C range.
Downloaded from www.vandenborre.be