Operation Manual

32
One or all cooking zone cut-off :
• The safety system functioned.
• This safety system activates when you forgot to cut-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of power level and breaking Automatic
overheating
Continuous ventilation after cutting off the hob :
• This is not a failure, the fan continuous to protect the electronic of the appliance.
• The fan cooling stops automatically.
The control panel displays [ L ] :
• Refer to the chapter control panel locking page.
The control panel displays [ Er03 ] :
• An object or liquid covers the control keys. The symbol disappears as soon as the key is
released or cleaned.
The control panel displays [ E2 ] or [ EH ] :
• The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E3 ] :
• The pan is not adapted, change the pan.
The control panel displays [ E5 ] :
• Defective mains. Control the voltage of the mains.
The control panel displays [ E6 ] :
• Defective network. Control the frequency of the electrical network.
The control panel displays [ E8 ] :
• The air inlet of the ventilator is obstructed, release it.
The control panel displays [ U400 ] :
• The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the after-sales service.
Downloaded from www.vandenborre.be