Operation Manual

Downloaded from www.vandenborre.be
38
Starting-up
You must first switch on the hob, then the heating zone:
 Start-up/ switch off the hob:
Action
Control panel Display
To start Press key [ ] 4 x [ 0 ]
Touch the key Press key [ ] Nothing or [ H ]
 Start-up/ switch off a heating zone:
Action
Control panel Display
Zone selection Press selection key from the zone [ 0 ]
Increase power Press key [ + ] [ 1 ] to [ 9 ]
Decrease power Press key [ - ] [ 9 ] to [ 1 ]
Stop Press key [ - ] [ 0 ] or [ H ]
If no action is made within 20 second the hob returns to waiting state.
Pan detection
The pan detection ensures perfect safety. The induction doesn’t work:
 If there is no pan on the heating zone or if this pan is not suited to induction cooking it is
impossible to increase the power and the display shows [ U
]. This symbol disappears
when a suitable pan is placed on the heating zone.
 If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back onto the heating zone. The
cooking continues with the power level initially set.
After use, switch the heat element off: don’t let the pan detection [ U
] activate.
Residual heat indication
After switching off the hob, the heating zones are still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
While the residual heat indicators are lit, do not touch the heating zones and don’t put any heat
sensitive object on them. There are risks of burns and fire.
Booster function
The booster function [ P ] grants a boost of power to the front left zone or right zone only.
If this function is activated the heating zones works for 5 minutes with an ultra high power.
To start the boost function, repeatedly press the [ + ] button until [ P ] appears in the display.
 Start up / Stop the booster function:
Action Control panel Display
Zone selection Press selection key from the zone [ 0 ]
Increase power Press key [ + ] [ 1 ] to [ 9 ]
Start up the booster Press key [ + ] [ P ] during 5 min
Stop the booster Press key [ - ] [ 9 ]
 Power management:
The whole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected
The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 7 ]