Operation Manual

2. Plug in
The LED indicator
-
3. Power on:
The LED
display
“0”, indicating that the unit is in a state of standby.
4. Heating:
standby,
, the induction cooker
g.
You can adjust the power level by
or right.
The LED display
ft
unit will exit the heating mode a
ndby.
5. Timer:
When the unit is heating, if you set the time without use manual or set the
time for 0, the unit can use default timer.
imer” mode,
the original timer is 0 mins, you can increase or decrease the time 1 minute
by pressing the “+” or “-“ key once, If you hold “+” or “-“ key ,the time will
increase or decrease 10 minutes. The range is: 0-99 minutes.
The induction cooker will turn-of
The buzzer sounds.
6. Shut down
"-
Heating level
Defalut time for
turn off(hours)
1 2 3
4
5
9
6
7
8
4 4 4
3
3
12
2
1
4
After the power supply is connected,
a beep will be heard
"
flashes and the display shows
", indicating that the unit is in
standby mode.
the control knob switch to right, the buzzer sounds.
Turn
the con
Turning
trol knob right, when
to the
the unit is in
, the LED
display shows 0-9
heatin
starts
the con
turning
trol knob left
0-9
shows the level of heating .
the control k
To turn the induction cooker off, turn
nob switch le
until the
“0”, the
display shows
nd return
sta
to
2 kinds of timer: manual and default.
There are
When the unit is heating,
pessing
the “+” or “-“ key enter the “T
will
In the timer mode
, if you not press the “+” or “-“ key within 5
do
count down.
start the time
set the time to 0.
In the timer mode, to
, you can press the “+” , if you wish to re-set the time
In the timer mode
cancel the time function
or “-“ key to enter the timer
mode.
f automatically when the timer runs out.
After using, revolve the control knob switch to left until the
display shows
", the unit will stop heating
and return to standby mode..
a beep
will be heard
seconds,
the unit will
EN
Downloaded from www.vandenborre.be