Operation Manual

Downloaded from www.vandenborre.be
GB
ELECTRICAL CONNECTION (UK ONLY)
For your safety please read the following information.
The appliance must be connected to a 220-240 volts 50/60 cycle AC supply
by means of a three pin socket, suitably earthed.
The appliance is supplied with a rewireable 13 amp 3 pin mains plug fitted
with a 3 amp fuse. Should the fuse require replacement, it must be replaced
with a fuse rated at 3 amp and approved to BS1362.
If the mains plug is unsuitable for the socket outlet in your home or is
removed for any other reason, then the old plug should be disposed of safely
to prevent the hazard of electric shock.
There is a danger of electric shock if the old plug is inserted into any 13 amp
socket outlet.
How to wire a 13 amp plug
Important
The wires in the mains lead on this appliance are coloured in accordance with
the following code:
Blue – Neutral
Brown – Live
As the colours may not correspond with the markings identifying the terminals
in your plug proceed as follows.
The blue wire must be connected to the terminal marked N or coloured black.
The brown wire must be connected to the terminal marked L or coloured red.
No wire must be connected to the terminal in the plug which is marked with
the letter E or with the earth symbol or coloured green and yellow.
The mains lead MUST be secured under the cord clamp.
1