Operation Manual

ASSEMBLY

Make sure that the appliance is switched off and unplugged from the mains socket.

1. Place the appliance base on a dry, level surface

with the control knob facing forward.

2. Place the bowl on the base, fitting the centre

opening of the bowl over the power shaft.

x Make sure the bowl handle aligns the unlock

symbol on the base.

3. Grasp the bowl handle and turn the bowl to the

left until it locks into position.

4. Insert the desired attachment into the bowl.

x If using the chopping blade, place it over the centre

pole of the bowl and allow it to fall freely to the

bottom of the bowl.

x If using the slicing/shredding disc, first place the disc stem over the power

shaft with large opening facing down, then place the slicing/shredding disc

over the disc stem.

a. If shredding, ensure that the raised shredding holes are on top;

b. If slicing, ensure that the raised slicing blade is on top.

5. Place the bowl cover on the bowl, making sure

the arrow on the bowl cover aligns the unlock

symbol on the bowl rim.

6. Grasp the feed tube and turn the cover to the left

until it locks into place.

7. Fit the food pusher into the feed tube.

8. Plug the appliance into the mains socket.

NOTE: Your food processor features a safety interlock system. The appliance will not

operate unless the bowl and bowl cover are properly aligned and locked into place.

OPERATION

WARNING: DO NOT OPERATE THE APPLIANCE WITHOUT BOWL COVER LOCKED.

Turning on and off the food processor

x To turn on the appliance, turn the control knob to the ON position. The appliance

will operate continuously and the indicator light will illuminate.

Downloaded from www.vandenborre.be