Operation Manual

CONTROL PANEL
GB
Programme knob
Turn the knob to select the desired programme.
There are 8 programmes available. After a programme is
selected, the corresponding light will illuminate.
Delay button
Press the button repeatedly to select the delay time
(3H, 6H, 9H or 12H) and the corresponding indicator light
will illuminate. The appliance will start operation after
the set time.
Temperature button
Press the button repeatedly to select the water
temperature. The corresponding temperature indicator
light will illuminate.
Start/Pause button
Press the button to start programmes and the indicator
light will illuminate. Press again to pause, the indicator
light will flash.
On/Off button
Press the button once to turn the appliance on. Press
again to turn the appliance off.
24
Press and hold the button for 3 seconds, a beep will be
heard and then signal function will be disabled. To activate
this function, press and hold the button again for 3 seconds.
Activation/ deactivation
of signal function
FP 105 E
12h
3h
6h
9h
20
40
60
90
Downloaded from www.vandenborre.be