Operation Manual

Downloaded from www.vandenborre.be
39
REVERSING THE DOOR
You can change the direction of opening of the door of your freezer by moving the hinges. When
reassembling, make sure the door is well aligned with the body of the freezer and that the seal
adheres correctly.
We remind you that the freezer must be unplugged when changing the direction of opening of
the door.
Remove screw covers
Unscrew and remove door lifting
upwards
Change position of
bottom hinge cover
Unscrew and
remove opening
limiter situated under
door.
Attach new
unused opening l
imiter in bag of spare parts
supplied with appliance.
Change position of
top hinge cover
using double sided
adhesive tape
available in bag of
spare parts provided with appliance.
Unscrew and remove top
Replace cover and
screw on.
Unscrew and remove top
hinge.
Screw it on other side in
right position
Put door back in position on the
bottom hinge.
Fix and screw the door into
position with the top hinge.
Replace screw cover.
Unscrew and remove bottom
hinge.
Screw it on other side in right
position
Remove screw
covers on
handles,
unscrew
handles.
Use hole cover
in bag of spare
parts
supplied with appliance to cover holes.
Screw handle back on other side and
replace screw covers.