Operation Manual
4
EN
Connecng tubes and accessories
1. Aach the hose handle into the tube by inserng the handle into the bigger end of one tube.
2. Connect the tube to the other one.
• Push forward the switch on the tube then adjust. Release the switch unl the desired length is
achieved.
3. Aach the desired cleaning accessory to the end of the tube.
To remove the tubes and accessory, hold each piece ghtly and pull firmly apart.
OPERATION
1. Pull the power cord out of the appliance and insert the
mains plug into the mains socket.
• A YELLOW mark on the power cord indicates the ideal
cable length. Do not extend the power cord beyond the
RED mark.
2. Press the power buon on top of the appliance to
switch on the appliance.
3. You can quickly reduce the sucon power by pushing
the air flow regulator on the hose handle.
Push it forward, sucon power will increase; push it
backward, sucon power will reduce.
Air flow regulator
Downloaded from www.vandenborre.be