Operation Manual

OVERVIEW

1. Lid cap

2. Lid

3. Blender jug

4. Motor base

5. Control knob

P (Pulse) button

7. Rubber feet

8. Stirrer

BEFORE FIRST USE

Before using your blender for the first time, remove all packaging material and labels.

Wash the lid, lid cap, stirrer and blender jug in warm soapy water. Rinse and dry thoroughly.

Clean the motor base with a damp cloth. Dry thoroughly.

OPERATION

Do not operate the blender continuously for periods longer than one minute on the highest speed setting 4.

Allow the blender to cool to the room temperature before commencing.

1. Place the motor base on a stable, level surface.

2. Mount the blender jug onto the motor base.

3. Turn the blender jug anticlockwise until it is fixed properly.

 The arrows on the blender jug and motor base shall be aligned when the jug is fixed.

 If the jug is not properly locked to the motor base, the blender will not start.

4. Plug the blender into the mains socket. Your blender is now ready to be used.

5. Add all necessary ingredients to the blender jug. Do not overfill the jug.

 Do not exceed 1.5 litres.

 Cut all food into small cubes (2-3 cm square) to achieve an even result.

NOTE: If mixing hard and soft foods together, begin with the hard foods and then add soft foods.

Blend until you have reached the desired consistency and even texture.

6. Place the lid onto the jug and then turn it anticlockwise until it locks in position.

 Make sure that the spout cover on the lid aligns with the spout on the jug.

7. Place the lid cap in the lid opening.

8. Switch on the blender by turning the control knob to the desired operating speed.

Downloaded from www.vandenborre.be