Owner Manual_Control panel

UNDER CABINET HOOD PREPARATION

WHAT YOU WILL NEED

INSPECT RANGE HOOD

PREPARE DUCTWORK

Power Drill

Screwdrivers

Drill Bits

Tape Measure

Masking Tape

Pencil/Marker

Metal or Aluminum HVAC Tape

Level

Wall Anchors*

Scissors/Box Cutter

• Check the contents of your box. They should include:

Range Hood

Wall Mounting Bracket

Hardware Bag

Transition Duct (Applies to Specific Models)

• Plug in and test controls, lights, and fan.

• Inspect for any damage caused during shipping.

• Please report any damage to Proline Customer Service within 14

days of receipt of hood by calling 877.901.5530

*Wall anchors will vary depending on wall material and the weight of the range hood being

installed. They can be found at any home improvement store.

Plan where your ductwork will be located. Install the proper sized

ductwork and exterior roof or wall cap, depending on where you will

be venting your hood to the exterior. Ductwork should already be

punched through the ceiling and above cabinet, or back wall and ready

to hook up to the range hood before beginning installation. See venting

requirements above.

NOTE

These are general installation directions for an Under Cabinet hood.

Please refer to your model’s instructional manual for specific details

and other installation options.