Installation & Assembly_2

6
VENTING OPTIONS
HORIZONTAL WALL VENTING
•This is an alternative option to vertical venting. Ducting goes
horizontally from the range hood through the house’s side wall.
Depending on the model of hood, venting can go straight through an
exterior wall from the back of the hood using a blower rotating kit*
(Option 1). If a rotating kit is not available we may be able to rotate the
hood’s blowers for an additional charge.
•The second option is to vent off the top of the blowers and elbow out
the back of the hood, through the wall. (Option 2) For correct venting
please allow at least 18" of straight vertical travel off the top of the
transition piece before attaching the elbow. (As seen)
•A side wall cap is needed to protect the ducting from the exterior. Seal
the side wall cap with caulking.
1
2
18"