User manual
COSMIC 1500DMX/COSMIC 1500
8
3.5 DMX ADDRESSING
To able to operate the COSMIC with a light controller, adjust the DMX start address for the rst a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX chan-
nel, adjust the start address 33 on the COSMIC. The other functions of the light eect panel are then auto-
matically assigned to the following addresses.
An example with the start address 33 is shown below:
Switch number
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
2 33 33-34 35 37 39
DIP-SWITCH 1 2 3 4 5 6 7 8 9
DMX VALUE 1 2 4 8 16 32 64 128 256
1
2
4
8
16
32
64
128
256
1
2
4
8
16
32
64
128
256
1
2
4
8
16
32
64
128
256
The address is set to start as a binary number by means of DIP-switch n° 1 - 9. Thus, it appears the addition
values of DIP-switches positioned to ON.
Examples with the start addresses 1, 6 and 104:
The easiest way is to start from the highest possible place value and to add the smaller values until the
start address will result
Switch number
Value
Start address 1: switch n° 1 set to ON
Start address 6: switch n° 2 e 3 set to ON
Start address 104: switch n° 4, 6 e 7 set to ON