Owner manual

Understand your product

Study the operating features and safety requirements at rst

before using the heat gun. Use the tool and accessories only

for the application intended.

Use tools only following instructions, prohibit any usage out of

the range.

1. Motor housing

2. On/Off switch and temperature switch

3. Handle

Accessories

Contains:

If you nd anything wrong, do not use the tool until the parts have been replaced or the

faulty has been rectied. Failure to do so could result in serious personal injury.

If any product defectiveness or missing parts was found, please do not use it until the

parts have been replaced or the faulty has been rectied. Failure to do so could result in

serious personal injury.

Setting up and Operation

The switch contains function of power on/off, temperature low/high. The low tempera-

ture is roughly 380°C, and high temperature is roughly 500°C.

Always ensure the power switch is at off position before plugging in.

Set power switch to I or II to heat one minute to reach its operation temperature.

Always wear protective gloves and eyes protection when working.

Place the heat gun upright on a at table carefully.

•