Instruction Manual

4
lly
vice
spect extension cords periodically and replace if
s Disconnect tools when not in use, before
om the habit of
ntional starting Do not carry plugged-in tools
use extension cords When tool is used outdoors,
to
d
part
r unless otherwise indicated
h
cessories or attachment
liance
14. Maintain tools with care Keep tools sharp and clean for
better and safe performance. Follow instructions for
lubricating and changing accessories. Inspect tool periodica
and, if damaged, have them repaired by an authorized ser
facility. In
damaged. Keep Handles dry, clean and free from oil and
grease.
15. Disconnect tool
servicing, and when changing accessories such as blades,
bits and cutters.
16. Remove adjusting keys and wrenches Fr
checking to see that keys and adjusting wrenches are
removed from tool before switching it on.
17. Avoid uninte
with finger on switch. Be sure the tool is switched off before
plugging in.
18. Outdoor
use only extension cords intended for use outdoors and so
marked.
19. Stay alert Watch what you are doing. Use common sense.
Do not operate tool when you are tired.
20. Check damaged parts Before further use of the tool, a guard
or other part that is damaged should be carefully checked
determine that will operate properly and perform its intende
function. Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other
that is damaged should be properly repaired or re placed by
an authorized service cente
elsewhere in the instruction manual. Do not use tool if switc
does not turn it on and off.
21. Warning The use of any other ac
other than recommended in the instruction manual may
present a risk of personal injury.
22. Have your tool repaired by an expert This electric app