User`s manual

ALWAYS ensure there is no risk of this before activating the tool or commencing work.

Personal safety

For your protection always wear safety goggles and breathing mask, keep fingers, hair

and clothing clear of moving parts. Do not overreach particularly on ladders and maintain

secure footing and balance. Always be aware of the required safety precautions.

Clothing

Avoid wearing loose clothing or jewelry as they may be caught in moving parts. Wear a

protective hair covering to contain long hair.

Protect the cable

Do not carry the tool by the cable or pull the cable to remove the AC/DC adaptor from the

socket. Protect the cable from heat, oil, solvents, sharp objects, or anything that could

damage the insulation. Never use a power tool that has a damaged cable or exposed

wires.

Disconnect tools

Always ensure the power supply is disconnected when not in use.

Inspect the tool before use.

Inspect the tool for any damage, cracks or missing parts, if in any doubt do not use and

consult a qualified electrician. Keep the handle dry and free form oil and grease.

Avoid Unintentional starting

Ensure the on/off switch is OFF before plugging into the power source. Do not use if

distracted or tired.

The Tool stops

If the tool stops unexpectedly or appears to break down in use, disconnect from the

power supply before handling moving parts.