User`s manual

FAQ
When I switch the grinder on the
motor doesn’t run, why？
10
Check sw
itch adapter the power is on
and the plug is correctly fitted.
Why does my grinder stop
sometimes？
Don't apply too much pressure the rpm
shouldn’t drop significantly on contact.
I keep slipping and have trouble
controlling the grinder, what can I
do？
Make sure you use the correct tool for
the application. Hold the grinder like a
pen and make minimal contact with the
work piece to prevent kickback. Use a
mask to prevent contact outside of the
area to be engraved and make sure to
use sharp new tools. Only grind small
amounts off with each pass, gradually
working toward the required finish.
Where should I store my mini
grinder？
In a dry place at a stable temperature
between 10℃ and 24℃ (50℉ and 75℉).
What should I do if my mini grinder
gets wet？
Dry fully for several days in a warm but
not hot place before trying to charge or
use.
How can I get my mini grinder
repaired if it is damaged？
Contact your retailer.
Where do I find my model number？
On the base at the rear.
Where can I get replacement parts,
advice or help？
寶工實業股份有限公司
PROKIT’S INDUSTRIES CO., LTD.
http://www.prokits.com.tw
E-mail:[e-mail]
©2014 Prokit’s Industries Co., LTD. All rights reserved 2014001(C)