Manual

FUNCTIONS
Addition / subtraction
Distance measurement
The next measurement is added to the previous one, then
press
the second measured value is shown and the result is
shown automatically.
The next measurement is subtracted from the previous one.
Then press
the result is always shown in the summary line
with the previous value in the second line.
The last step is canceled.
Area
Press once. The symbol appears in the display.
Press
button to take the first length measurement (e.g.
length).
Press
again to take the second length measurement (e.g.
width).
After taking the second measurement, the area/surface is
automatically calculated and displayed in the summary line. The
last individual measured value is indicated at the second line in
the display.
Volume
For volume measurements, push button
twice until the
indicator for volume measurement appears in the display.
Afterwards, Press this button
to measure the length,
Press this button
for width, press button for height.
After taking the third measurement, the volume is automatically
calculated and displayed. The last individual measured value is
not displayed.
Fig.E
I
ndirect measurement determining a
distance using 2 measurements
e.g. when measuring heights that require the
measurement of two or three measurements
as following step:
Press this button
three times, the display
- 6 -