Owner's manual

RESISTANCE

Range Resolution Accuracy

200Ω 0.1Ω ±(0.8% of rdg + 5 digits)

2kΩ 1Ω ±(0.8% of rdg + 5 digits)

20kΩ 10Ω ±(0.8% of rdg + 5 digits)

200kΩ 100Ω ±(0.8% of rdg + 5 digits)

2MΩ 1kΩ ±(1.0% of rdg + 5 digits)

Maximum Open Circuit Voltage: 2.8V

Overload Protection: 250V DC or rms. AC for all ranges.

TRANSISTOR hFE TEST (0-1000)

Range Test Range Test Current Test Voltage

NPN & PNP 0-1000 Ib=10mA Vce=2.8V

BATTERY TESTING

Range Accuracy

1.5V ±(2.5% of rdg + 2 digits)

OPERATING INSTRUCTIONS DC VOLTAGE

MEASUREMENT

1. Connect the red test lead to the "VΩmA

" jack and the

black test lead to the "COM" jack.

2. Rotate the function selector to the desired DCV position. If the

voltage to be measured is not known, set the selector to the

highest range position, and then reduce the range until proper

resolution is obtained.

3. Connect test leads across the source or load being measured.

4. Read voltage value on the LCD display along with the polarity

of the red test lead connection.