Owner's manual
5
FRONT PANEL DESCRIPTION
Display
3 1/2 digit, 7 segment, 15mm high LCD.
Back light (option)
When this button is pushed, the Back light of display is on. After
about 5 seconds, the Back light is self-off. The Back light is on
again, just push this button once.
Rotary switch
This switch is used to select functions and desired ranges as
well as to turn on/off the meter.
Hold button
When this button is pushed, the display will keep the last reading
and " " symbol will appear on the LCD until pushing it again.
"
10A
"
jack
Plug in connector for red test lead for 10A measurement.
"
COM
"
jack
Plug in connector for black (negative) test lead.
"
VΩmA
"
jack
Plug in connector for red (positive) test lead for voltage, resis-
tance and current (except 10A) measurements.
SPECIFICATIONS
Accuracy is specied for a period of one year after calibration and
at 18 to 28°C(64°F to 82°F) with relative humidity to 80%.
GENERAL
Maximum voltage between
terminals and earth ground : CAT II 600V
Fuse protection : F 200mA/250V
Power : 9V battery, NEDA 1604 or 6F22
Display : LCD, 1999 counts, updates 2-3/sec.
Measuring method : Dual-slope integration A/D converter
Overrange Indication : Only gure "1" on the display
Polarity indication : "-" displayed for negative polarity
Operating Environment : 0 to 40ºC
Storage temperature : -10ºC to 50ºC.
Low battery indication : " " appears on the display
Size : 138mm×69mm×31mm
Weight : Approx.170g.
1
2
3
4
5
6
7