User`s guide

english
34Multi image processor User’s Guide – Geometry Correction
When Real Time Warp is On, only the active control point will be added to the image from the
IG if Show active is selected. Show active can be enabled in the Calibration Panel Toolbar
see Figure 6-8.
Figure 6-8. Calibration panel guide points
NOTE! When working on a warp in Real Time mode, the displayed, warped image will be
generated using a linear approximation. When going online the selected algorithm will be
used to calculate the online image. There could be a small difference between the image in
Real Time warp mode and in online mode.