User`s guide

www.projectiondesign.com
english
57
Figure 12-45. Save current calibration to the MIPS unit
If you want to recall your last saved calibration, click “Load Calibration” in the Calibration view
toolbar (Figure 32).
Storing/recalling data to/from the control PC
Before you can save a calibration to the control PC, you fi rst have to save your calibration to
MIPS unit. When performing a backup to the control PC, the last data stored in the MIPS unit
will be copied to the control PC. To backup your data, select “Backup Calibration fi les..” from
the fi le menu (Figure 12-47). The window in Figure 12-47will appear.