User`s guide

english
56MIPS User’s Guide – Storing and recalling data
Storing and recalling data
The MIPS system has powerful and fl exible features for storing and recalling calibration data.
When a calibration is a stored, the user can recall all calibration parameters at any given time
or on any given control PC. Calibration can be stored:
• In the MIPS unit.
• On the control PC. This is a copy of the data stored in the MIPS unit.
• Both.
Storing/recalling calibration to/from the MIPS unit
When storing calibration to the MIPS unit, it will be saved in the internal memory of the unit.
Should the MIPS unit or the control PC loose power during calibration, the data can easily
be recalled. To save the calibration to the MIPS unit click “Save Calibration” in the Calibration
view toolbar, press Ctrl+S or select “Save Calibration” from the fi le menu (Figure 12-45). Any
calibration already stored in the MIPS unit will be overwritten.