User`s guide

www.projectiondesign.com
english
43
Test patterns
MIPS has several built-in test patterns for easier setup. This tool can be used to tune
the geometry (warping) in a setup to match reference points, aspect ratio, ensure visual
correctness and to confi gure 3D image generators for shapes like cylinders and domes. The
test patterns are:
• Circles. Add circle to your calibration view to visually confi gure for aspect ratio.
• Grid (Pixel). Specify a grid with height and width (in pixels) of all cells in the grid.
• Grid (Angle). Specify a grid with horizontal and vertical degrees for setup in domes or
cylinders.
Multiple test patterns can be used simultaneously.
Figure 9-30. Adding test patterns
To add a test patterns to the calibration view, click “Test Images” in the actions toolbar. See
Figure 9-30. The window in Figure 9-31 will appear.
Figure 9-31. Test Image Setup window