User`s guide

www.projectiondesign.com
english
33
Working with the Mesh Smythe algorithm
To start working with Mesh Smythe algorithm, click the “ Warp” icon, add the Mesh Smythe
algorithm and start with setting the grid size to 1x1. First map the four corners to their
desired location. As required, increase the grid size. This will add more rows, columns and
control points to the mesh and enable the possibility to map the grid correctly onto the
surface. Figure 7-22 is showing a simple 3x3 grid using the Mesh Smythe algorithm. Even
though the lines between the control points are not smoothly curved in the user interface,
they will be in the MIPS unit and hence on the screen.
Figure 7-22. Working with the Mesh Smythe algorithm