User Manual

Operational tips: and buttons are respectively used to turn the browse page

upward and downward, while and buttons are respectively used to turn the

interfaces left and right.

Device information

The product model, parameters and SN code of the controllers are displayed below:

Operational tips:

and buttons are respectively used to turn the browse page

upward and downward.

Test operation

Load switch test operation is conducted on the connection solar controller to see if

the load output is normal. The test operation does not affect the working settings

under actual load, which means that the solar controller will exit from the test

mode when exiting the operational interface of the test.

Operational tips: Enter the page and input correct password; use

and buttons to

modify the ON/OFF status values, while use and buttons respectively to confirm

and cancel the test operation.

1. Product type

Rate. Vol: XX V

Char. Cur: XX A

Disc. Cur: XX A

2. Product type

SN: 16 Digit code

Test Operation

Product Type: ON/OFF