User Manual

WARNINGS – IMPORTANT PLEASE READ

• SC110 is designed for indoor use only

• Use SC008 or SC015 for outdoor applications

• Do not disassemble the controller. Take to a qualified person if the unit requires repairing.

• Lead acid batteries can be dangerous. Ensure no sparks or flames are present when working

near batteries

• Eye protection should always be used. Never short circuit the battery

• Given sufficient light solar panels always generate energy even when they are disconnected.

• Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a fire

hazard. We recommend that you cover up the panel(s) with some sort of soft cloth so you can block

all incoming light during the installation. This will ensure that no damage is caused to the Solar

Panel or Battery if the wires are accidentally short circuited

• Always install a battery fuse on each circuit including the solar controller

MOUNTING THE DEVICE

The Solar Controller is mounted as below

The quickest and easiest way to mount the unit is to use the two plastic spacers and self tapping

screws supplied and mount the unit to a flat surface.

5723

104

Fig 1.