Manual

16
5.2 Monitor
5.2.1 Monitor Symbol Explanation
No. DESCRIPTION COMMENTS
1 Water level 0%-25%-50%-75%-100%
:DWHU7DQN EMPTY Flashing, the water is less than the recommended level
:DWHU7DQN
:DWHU7DQN
:DWHU7DQN FULL Flashing, the gray water or waste water is more than the alarm level
2 :RUNLQJ0RGH GRID AC grid status
CHARGE ONLY Battery charger only
3 Load Status of DC-Load switch in system: on / off
BATTERY DC loads are powered by battery
4 Water Pump Pump 1 is ON
Pump 1 is OFF
5 Alarm Error Code Overload alarm
Over temperature alarm
System error code. Refer to the error codes on page 20
6 VCR connection 9ROWDJHFKDUJLQJUHOD\9&5LVFRQQHFWHG
9ROWDJHFKDUJLQJUHOD\9&5LVGLVFRQQHFWHG
7 Output power Voltage of system output
Current of system output
Table 8 Symbol Explanation
Charging state
Pump/Up switch
Silent/Esc switch
Alarm error code
Water pump
Solar charge
Power Source
Water tank 4
Water tank 3
Water tank 2
Water tank 1
Date
Service battery:Type/Capacity
Service battery: Voltage/Current/Time to go
Service battery SOC (State of Charge)
Voltage of vehicle battery
VCR connection
Light/Enter/Setting switch
Time
Load /Down Switch
TBA
Temperature
Output power
Load
ON
!
Figure 22 An overview of monitor