INTELLI-RV 12V POWER MANAGEMENT SYSTEM INSTALLATION GUIDE P/No.
WARNINGS • Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging • Before charging, read the instructions • For indoor use. Do not expose to rain • For charging lead acid and LiFePO4 batteries ONLY (of the size & voltage specified in the specifications table) • Always charge the battery on the correct voltage setting.
PMLCD-BT 3
Code Name 1 2 3 4 12V 30A Charger and 35Amp Power supply, 30A MPPT Solar controller LCD Display with Bluetooth T/S PM435 & PM335 200mm water sensor with 4.5m cable 400mm water sensor with 4.5m cable Code PMLCDC PMBS PMTS PMSW200 PMAC 4 Description 5m Cable to suit PMLCD-BT Battery sensor with 3m cable Temperature sensor with 5m cable 4.5m Cable to suit PMWS200 (not supplied) AC power cord, 1.5m, AUS Model Qty PM335 1 Part No.
1 PM335 TO PMLCD-BT (COM) (15A) (15A) (10A) (15A) (10A) (10A) (15A) (10A) (10A) (10A) (10A) (10A) (10A) (10A) 5
1 PM335 6
2 PMLCD-BT 7
4 Water tank level sensor (Not supplied) 8
4 PMWS200 9
4 Water tank level sensor (Not supplied) 10
4 PMWS400 11
WARRANTY STATEMENT Applicable only to product sold in Australia Brown & Watson International Pty Ltd of 1500 Ferntree Gully Road, Knoxfield, Vic.
