Manual

7
Model PM100
OTHERS
PHYSICAL SPECIFICATIONS
APPROVAL
Disconnect voltage
Delay off time
Reconnect voltage
Battery Disconnect
(LVD)
60Sec
10.5VDC
200mA
11.5VDC
240VAC is off, no vehicle charging
LVD battery <10.5V.
Current draw on battery
Current draw
on battery
LVD battery <10.0V.
Current draw on battery
60mA
Battery Charger Disconnects, Loads Disconnect
2.6kgs
270x197x70mm
steel case
M4 Screw (16mm²)
M3 Screw (4mm²)
≥50MΩ
2KVDC/1min/1mA
AS/NZS 60335.2.29
CISPR14
Fan colling
IP20
0mA
Battery charger shutdown
10
Protection
Fused outputs
10Ax6;15Ax4
YES
The fuse blown
Reduce output, until overload is removed
Numbers
Rated current
Short circuit on output
Reverse Polarity
Overload protection
Battery charger over temperature
Battery over voltage limits
Protection category
Insulation resistance
Dielectric strength
LVD
EMC
Dimensions (L*W*H)
Weight (kg)
Enclosure
Battery Connector
Load Connector
Cooling