Brochure

New from Projecta, the Intelli-Charge IDC25 is the
toughest and most advanced dual battery management
system available on the market today. Allowing you to
charge your 12V second/auxiliary deep cycle battery on
the go, the IDC25 is shock, vibration and dust proof. The
unit is also water resistant, making it suitable for both
in-vehicle and under-bonnet installation.
Able to charge simultaneously from both solar and
alternator (9–32V) inputs, IDC25 can also function as an
MPPT solar controller and features dual charging modes
for compatibility with both smart and conventional
alternators. Loaded with a host of safeguard features,
the easy to install unit includes over/under voltage,
anti-sparking, reverse connection and over temperature
protection systems to ensure peace of mind.
The IDC25 sets a new benchmark for DC-DC battery
management.
Ideal for
under bonnet
installation
Pre-wired
cabling,
labelled
for ease of
installation
PART No. IDC25
Description 9–32V 25A DC Charger
Barcode 9315219252517
Availability Ex Stock
Carton Qty Box (1)
INTELLI-CHARGE 25A 9–32V, 3 STAGE
DC/SOLAR BATTERY CHARGER
Over Temperature Protection
IDC25 will automatically adjust
its output based on battery
temperature, preventing
overcharge and overheating in
small batteries and hotter climates
Reverse Connection Protection
The charger will detect and indicate
a reversed connection on the input
and output terminals, preventing
damage to the internal circuitry of
the unit
Over and Under Voltage Protection
IDC25 will automatically shut down
if it detects an over voltage or
under voltage problem, preventing
damage to the battery
Spark-Free Protection
IDC25 will not begin charging
unless the load is securely
connected, preventing output leads
from sparking due to accidental
short circuit
DEEP CYCLE BATTERIES
SIMULTANEOUS
SOLAR AND
ALTERNATOR
CHARGING
TEMPERATURE
COMPENSATION
25A SOLAR MPPT
MULTI-CHEMISTRY
DUAL CHARGING
MODES FOR SMART /
CONVENTIONAL
ALTERNATORS
NEW PRODUCT RELEASE OCTOBER 2015
IDC25 FOR SAFER CHARGING
SPECIFICATIONS
SIZE
OPERATING TEMPERATURE
BATTERY CAPACITY
ALTERNATOR INPUT VOLTAGE
149 x 122 x 42mm
-10°C to +80°C
75–300Ah
9–32Vdc
SOLAR INPUT 23Vdc, 400W
OUTPUT CURRENT Input 9–11Vdc 20A
Input 11V–32dc 25A
CHARGE CONTROL
Gel: 14.1V
AGM:14.4V
WET: 14.7V
Calcium: 15.4V
SMART ALTERNATOR
12V VEHICLE
Turn On: 12.2–20V
Turn Off: <11.9V
24V VEHICLE
Turn On: ≥24.4–32V
Turn Off: <24V
VSR ALTERNATOR
12V VEHICLE
Turn On: ≥13.4–20V
Turn Off: <12.8V
24V VEHICLE
Turn On: ≥26.8–32V
Turn Off: <25.6V