Manual

8
UNDERSTANDING YOUR INVERTER
A) IP150 & IP300
These inverters are equipped with a bi-colour status L.E.D and audible alarm. During
normal operation, the L.E.D will illuminate solid green. In the event of a fault or error,
the alarm will sound and the L.E.D will illuminate various signals.
STATUS L.E.D SIGNAL ALARM
Normal Green –
Low Battery Voltage Green ON
Low Battery Voltage Shutdown Green/Red (Flashing) / ON
Over Temperature Shutdown
and Output Short Circuit Red ON
Overload Shutdown Red (Flashing) ON
High Battery Voltage Shutdown Green (Flashing) ON
B) IP600 & IP1000
These inverters are equipped with an audible alarm and a multi-function LCD screen
with selection buttons allowing you to monitor the inverter’s performance. During
normal operation, the LCD screen will default to the VOLTS display (input battery
voltage). Alternative information can be displayed by pressing the relevant buttons:
VOLTS: Displays input battery voltage
WATTS: Displays the amount of power being drawn by the appliance (in Watts)
LOAD %: Indicates the percentage of total capacity being drawn by the appliance
In the event of a fault or error, the alarm will sound and the LCD screen will display
one of several fault codes.
STATUS CODE REMOTE L.E.D SIGNAL ALARM
Normal – Green –
Low Battery Voltage Lb Green ON
Low Battery
Voltage Shutdown Lb Green/Red (Flashing) / ON
Over Temperature
Shutdown OTP Red ON
Output Short Circuit OSP Red ON
Overload Shutdown OPP Red (Flashing) ON
High Battery
Voltage Shutdown Hb Green (Flashing) ON
IP150-1000 Instruction Manual_1 3/02/12 11:01 AM Page 8