Manual

9
Important: For 24V vehicles, a battery master switch is required to connect a 12V solar
panel to the IDC45 solar input. This switch is used to turn the solar panel on and off.
When solar power is too low to provide fast charge to the auxiliary battery, by turning
off the 12V solar panel, IDC45 can provide fast charge through alternator input.
TYPICAL WIRING INSTALLATION
1. Full System
12V Solar Panel
* Optional
*
*
*
For vehicles fitted with
a Smart Alternator only
Lithium Iron Phosphate
charging mode
LED Panel
Mount Indicator
Earth/Chassis
Alternator/Starter Battery – Red (8mm
2
)
Ground/Chassis – Black (8mm
2
)
Ignition override – Blue (1.5mm
2
)
External LED – Pink (1.5mm
2
)
Solar – Green (8mm
2
)
Output/Auxiliary Battery – Grey (8mm
2
)
Temperature Sensing – Black (twin core)
Temp Sensor mount
to battery casing
connects to ignition feed if smart alt.
Earth/Chassis
Earth/ChassisGround/Chassis
Fuse
Fuse
Battery 2
(Aux Battery)
Battery 1
(Starter Battery)