Product Manual

CHARGING WITH 12V DC

Your Jumpstarter can be recharged from a 12V DC socket. A single-ended accessory

plug and lead is included for recharging while driving.

1. To charge, rotate the switch on the back of the unit to ON AND CHARGING (HP2012)

and 12V AND CHARGING (HP2200).

2. Connect the 12V charging lead to your vehicles cigarette lighter socket and to the

jumpstarter’s charging socket.

3. Start the car. The vehicle’s alternator will charge both the jumpstarter and the vehicle

battery at the same time. The CHARGING LED will illuminate blue while charging and

the FULL LED will illuminate solid green when fully charged. The jumpstarter’s charge

control will automatically stop charging and initiate maintenance mode keeping the

battery fully charged and ready for use without risk of overcharging. Once the vehicle

is turned off the jumpstarter will stop charging.

Note: Appliances can be run from the jumpstarter during DC charging, for example

a fridge or light.