Specifications

9
RAPID CHARGE
 Turnthe‘CHARGERATE’dialonthetoppaneloftheunitto‘RAPIDCHARGE’&setthe
timerbetween0-60min.TheRapidChargefunctionwillprovidea70Achargetoyour
batteryidealforwhenashortpowerfulchargeisrequired.
STEP 6 – CHARGING
 Duringcharging,theChargeMeter’sneedlewilldecrease
towardstheleft.Afullychargedbatteryisindicatedbyavery
lowreadingaccordingtothebattery’scapacityandcondition.
 Oncethispointhasbeenreached,proceedtodisconnectthe
battery(ReferSTEP7“DISCONNECTION”).
 Important:
 ChargingwillcontinueuntiltheOn/OffswitchisturnedtoOFF.
 Thebatteryandchargermustbemonitoredtoensurethebatteryisnotovercharged.
 Oncecharged,theliquidinsidethebatterymaystarttoboil.Itisrecommendedtostop
chargingwhenthisoccurstopreventdamagetothebattery.
STEP 7 – DISCONNECTION
 Turnthe‘CHARGERATE’dialtothe‘OFF’positionanddisconnectchargerfrom
the240Vsupply.
 Batteryoutofvehicle
 RemovetheBLACKlead(batteryclip)fromthebattery.RemovetheREDlead(battery
clip) from the battery.
 Batteryinvehicle
 Removethechassisconnection.Removethebatteryterminalconnection.
ChargeMeter