Specifications

CHARGING INSTRUCTIONS

STEP 1 – CHECK THE ELECTROLYTE LEVEL

 Priortochargingthebattery,removetheventcapsandchecktheelectrolytelevel.(Not

requiredonsealed&maintenancefreebatteries).Theelectrolyteshouldbe6mm(1/4”)

abovethebattery’splates.

 Iflow,topuptheelectrolytewithdistilledwatertothecorrectlevelandrefitthevent

caps.

STEP 2A – CONNECTION OUT OF VEHICLE

 ConnecttheREDlead(batteryclip)fromthechargertothePositive(+)batterypost.

 ConnecttheBLACKlead(batteryclip)fromthechargertotheNegative(-)batterypost.

 CONNECTIONOUTOFVEHICLE

STEP 2B – CONNECTION IN VEHICLE

 DetermineifthevehicleisPositively(+)orNegatively(-)earthed.Negativelyearthed

vehicleshaveacable(usuallyblack)fromtheNegativebatteryterminaltothevehicle’s

chassis.

NEGATIVELY EARTHED (MOST VEHICLES)

 ConnecttheREDlead(batteryclip)fromthechargertothePositive(+)batteryterminal.

 ConnecttheBLACKlead(batteryclip)fromthechargertothevehicle’schassisaway

fromthefuellineormovingparts.

 CONNECTIONINVEHICLE(NEGATIVELYEARTHED)