Specifications

HOW TO CHANGE OUTPUT FUSE

 Thebatterychargerisfittedwith2x100Afusesdesignedtoprotectthebattery

chargeragainstreverseconnection&shortcircuit,thefuseislocatedonthetoppanel

of the battery charger.

 Toreplaceblownfuses:

1.Disconnectbatterychargerfrom240Vmainspower.

2.Disconnectbatterychargerleadsfromthevehiclesbattery.

3.Removefusecoveronthetoppaneloftheunit.

4.Removeandrefitfuses(ProjectaP/No.HDBCF100A)usinga10mmsocket.

5.Refitfusecover.