Specifications

10
ENGINE START FUNCTION
STEP 1 TO 4 – FollowSTEPS1to4ofthecharginginstructionsofthisbooklet.
STEP 5 – Turnthe‘CHARGERATE’dialtothe‘RAPIDCHARGE’function,andsetthe
‘TIMER’dialto5minutesandallowchargertochargethevehiclesbattery.
STEP 6 – Oncethe5minuteRapidChargeiscomplete,turnthe‘CHARGERATE’
dialto‘ENGINESTART’.
STEP 7 – Turnthevehicle’signitionkeytostarttheengine.
STEP 8 – Ifenginefailstostartafter3secondsrepeatinstructionSTEP5&6before
attempting to start the engine again.
NOTE:Donotrepeatthisoperationmorethan5times.
NOTE:WheninenginestartmodetheHDBC90usesincreasedpowerforashortperiod
oftime.Ensureotherappliancesconnectedtothatpowercircuitareturnedofftoavoid
fuseorcircuitbreakeroverloadinthebuildingsswitchboard.