Specifications

22 www.tradezone.co.nz
AUTOMOTIVE
INSTALLATION KITS
301301
MAJOR BEARING INSTALLER/REMOVER SET
Comprehensive master set eliminates damage to bearings and
seals. Contains a hammer, drive shaft and 33 flat bearing and
seal adaptors plus three shaft sizes and a dead blow hammer.
Adaptors are manufactured from high impact P.O.M. materials.
301302 Dead Blow Hammer
301303 Small Drive Shaft
301304 Medium Driver Shaft
301305 Large Driver Shaft
301306 Adaptor - 10-26, 10-30, 10-35,
12-28, 12-32, 12-37mm
301307 Adaptor - 15-32, 15-35, 15-42,
17-35, 17-40, 17-47mm
301308 Adaptor - 20-42, 20-47, 20-52mm
301309 Adaptor - 25-47, 25-52, 25-62mm
301310 Adaptor - 30-35, 30-62, 30-72mm
301311 Adaptor - 35-62, 35-72, 35-82mm
301312 Adaptor - 40-68, 40-80, 40-90mm
301313 Adaptor - 45-75, 45-85mm
301314 Adaptor - 45-100mm
301315 Adaptor - 50-80, 50-90mm
301316 Adaptor - 50-110mm
301350
BEARING & OIL SEAL INSTALLATION SET
Eliminates damage to bearings and seals. Cones may be used
either side. Cones also available individually.
Set Contents:
301351 Tapered cone 40mm
301352 Tapered cone 44mm
301353 Tapered cone 50mm
301354 Tapered cone 60mm
301355 Tapered cone 63mm
301356 Tapered cone 65mm
301357 Tapered cone 72mm
301358 Tapered cone 76mm
301359 Tapered cone 80mm
301360 Driver Shaft 140mm
305004
OIL FILTER REMOVER SET 15 PIECE
Removes and replaces cap type oil filters by gripping the
corrugated end of the filter.
Applications include Japanese O.E. filters and major imported
brands including Wix, Purolator, Motocraft, Fram etc.
Reduces the possibility of crushing the filter body using
conventional filter removal tools.
Use with 3/8” or 1/2” sq drive tools.
OIL FILTER REMOVER SET
TESTERS
COOLING SYSTEM TESTER
Comprehensive kit enables testing on a wide range
of cooling systems for both passenger vehicles and
light commercials.
The gauge is colour coded and the pump is
constructed from Polyoxymethylene (POM), a high
impact substance stronger than steel, yet able to
withstand the corrosive factors of inhibitors.
It also contains an integrated pressure blow-off
valve. The automatic air inlet contains a shutdown
valve, preset regulator, pressure relief valve and
gauge.
Adaptors fitted are numbered and include with quick-
release couplings. Vacuum purge and refill kit and
thermometer is also included in some kits.
High-powered, manual pressure-pump with easy to
read, colour coded gauge. In line pressure regulator
is supplied for easy connection to an air supply valve.
A vehicle application list specifically for Australian
and NZ markets has been developed and included
in 308550 & 308551, to enable easy identification
of the correct adaptor by application.
Instruction manuals are also included outlining the
correct operation of each kit.
308550
COOLING SYSTEM PRESSURE TESTER & VACUUM REFILL
MASTER KIT (24 PIECE)
Cooling system hand pump. 16 colour coded adaptors. Vacuum
purge and refill kit and thermometer.
Vehicle application list (R&D specifically for Australian and NZ
markets). Instruction manual.
304400
ENGINE OIL PRESSURE TESTING SET
Fully functional, quality testing unit which provides trade
professionals with the perfect solution to diagnosing worn oil
pumps, pressure switches and oil warning indicators.
Large 80mm diameter gauge with dual scale 0-140 psi (0-10)
bar. Snap coupling adaptors with shut-off valve allow for speed
and safe operation. Permanently oil primed, long (1300mm)
flexible pressure hose and blow-off valve. Superior modern
design, compact and organised. Ideally suited for use by the
trade on a wide range of vehicles and stationary motors.
Snap couplings provide for fast and efficient testing.
The 304411 90˚ adaptor permits excellent subsidiary access to
hard to reach areas. Operator manual included.
Automotive.indd 22 29/11/12 8:12 PM