Specifications

www.tradezone.co.nz 21
AUTOMOTIVE
FLOOR JACKS
647528H
3 TON GARAGE JACK
Meets ANSI specifications.
Lifting range 138mm to 495mm.
Extra long frame and handle for added reach.
Knurled handle grips.
Heavy duty design with superior lifting capacity.
Flanged frames for extra strength.
Extra wide frame and wheel for stability.
Features two fixed and two castor wheels.
Overload protection valve.
Weighs: 36kg.
Z647528-2 Castor Wheel
Z647528-04 Front Wheel
Other spare parts available, please enquire
SJG0801
GARAGE JACK & AXLE STANDS SET
3 Ton Powerbuilt Garage Jack:.
Meets ANSI specifications.
Lifting range 138mm to 495mm.
Heavy duty design with superior lifting capacity.
Flanged frames for extra strength.
Extra wide frame and wheel for stability.
Features two fixed and two castor wheels.
3 Ton Powerbuilt Axle Stands:.
Meets ANSI specifications.
Support range 286mm to 425mm.
Heavy duty stamped steel frames with fully welded seams.
4-Point wide stance design for maximum load stability.
Ratchet design for easy positioning.
Ductile iron ratchet Bar.
10 Height settings.
(Package weighs: 42kg).
ZSJG0801-CWF Castor Wheel
ZSJG0801-FW Front Wheel
Other spare parts available for the Jack, please enquire.
JACG-T820028
PRO GARAGE FLOOR JACK LONG REACH 2 TON
Garage Floor Jack Low Profile.
Min Height 76mm.
Max Height 510mm.
JACG-T825011L
ALUMINIUM/STEEL GARAGE FLOOR JACK 2.5 TON
Min Height 100mm.
Max Height 460mm.
JACG-T83000ET
GARAGE JACK WITH FOOT PEDAL 3 TON
Min Height 150mm.
Max Height 490mm.
JACG-03LP
GARAGE FLOOR JACK LOW PROFILE 3 TON
Min Height 85mm.
Max Height 455mm.
304350
PETROL ENGINE COMPRESSION TESTER KIT
Comprehensive kit designed for petrol engines with M10, M12,
M14 and M18 spark plug ports.
Comes complete with various extensions and thread chasers –
along with applicable seal replacements and a spare pressure
blow-off valve. Checks condition of valves, piston rings, gaskets
and cylinder heads. Suitable for cars, vans, 4WDs, motorcycles
and stationary engines. Operator manual included.
307300
FUEL INJECTION PRESSURE TESTER KIT
Checks fuel delivery pressure. Pressure outside manufacturers
specifications will result in poor engine performance, difficult
starting (hot and cold) backfire, misfire, high fuel consumption
and incorrect CO levels. Comprehensive set for mechanical and
electronic fuel injection systems. Pinpoints problems in filters,
lines and regulators. Complete with assorted hoses, banjo bolts,
hose barb fittings and unions necessary to adapt to early and
later model vehicles. Item codes refer to the adaptors/fittings
and are marked either on the product or storage case, or both.
Adaptors/fittings are only available as sets.
Sets 307301, 307312, 307319, 307329.
Operator manual included
304450
DIESEL ENGINE COMPRESSION TESTERS
Comprehensive kit for checking compression on both direct and
indirect diesel injected engines.
Also ideally suited to marine and industrial engines.
Checks engine compression whilst cranking.
Built-in pressure release enables complete testing without having
to disconnect from the engine.
Small profile, snap release coupling system.
Dual scale 100mm gauge 0-1000PSI and 0-70 bar.
Flexible hose provides easier access within confined spaces.
Operator manual included.
TESTERS
Automotive.indd 21 29/11/12 8:12 PM