Specifications

ManualsBrandsProjecta ManualsBattery ChargerHDBC90

www.tradezone.co.nz 31

AUTOMOTIVE

MAINTENANCE TOOLS

SKF General purpose thermometer ThermoPen

The ThermoPen is a user-friendly, durable pocket size thermometer. Its sturdy

exible probe tip ensures effective surface contact for accurate temperature

measurement. Since no maintenance engineer should work without one, the

ThermoPen is supplied with a handy pouch with belt clip for protection and

portability. The ThermoPen measures the temperature of a wide variety of

industrial applications such as bearing housings and gearboxes quickly and

accurately.

• Compact, ergonomic design

• Wide measurement range, from -40 to 200 °C

(-40 to 392 °F)

• Temperature reading selection in °C or °F

• Flexible probe tip for better surface contact,

providing high measuring accuracy

• Dust tight and water resistant, rated IP 65

• Maximum temperature function allows temperature

peak hold

• Auto power off function

• Ultra low power consumption

Ordering details

Complete designation

TMTP200

SKF bearing tting tool kit TMFT 36

Poor tting, usually using brute force, accounts for 16 % of premature bearing

failures. The SKF bearing tting tool kit TMFT 36 is designed for quick and precise

mounting of bearings, while minimising the risk of bearing damage. The right

combination of impact ring and sleeve allows effective transmission of mounting

force to the bearing ring with the interference t, minimising the risk of damag-

ing the bearing’s raceways or rolling elements. The kit contains 36 impact rings,

3 impact sleeves and a dead-blow hammer packed in a lightweight carrying case.

In addition to mounting bearings, the TMFT 36 is also suitable for mounting other

components such as bushings, seals and pulleys.



Ordering details

Complete designation

TMFT 36

SKF Portable Induction Heater - TMBH 1

The SKF High Frequency Portable Induction Heater TMBH 1 is a portable

lightweight heater for heating bearings with an inner diameter ranging from 20

to 100 mm (0.8 to 4 in) and a maximum corresponding weight of 4.5 kg (10 lb).

The heater uses a patented method of heating based on high frequency induction,

which provides optimised efciency.

This method is very quiet and creates no magnetisation at all. In addition to

bearings, the heater can also be used for heating ferrous components such as

gears, pulleys, bushings and shrink rings.

Ordering details

Complete designation

TMBH1

Maintenance Tools

Oil Safe

The Oil Safe range of products are ideal for the storage and administration of

uids and oil lubricants. Oil Safe consists of various size drums and dispensing

lids, which are fully interchangeable to meet the customer’s specic lubrication

requirements. The lids are available in ten different colours to help in creating

a coloured coded system. There are ve different lids (three with incorporated

spout), ve different size drums ranging from 1,5 to 10 liters (1,6 to 10.5 quart).

In addition, there are two different spout hose attachments and one pump that

can be used with the Oil Safe

utility lid.

Ordering details

Contact your local

SKF Authorised Distributor

SKF BEARING FITTING TOOL KIT

TMFT 36

Poor ﬁtting, usually using brute force,

accounts for 16 % of premature bearing

failures. The SKF bearing ﬁtting tool kit

TMFT 36 is designed for quick and precise

mounting of bearings, while minimising

the risk of bearing damage. The right

combination of impact ring and sleeve allows

effective transmission of mounting force

to the bearing ring with the interference

ﬁt, minimising the risk of damaging the

bearing’s raceways or rolling elements.

The kit contains 36 impact rings, 3 impact sleeves and a dead-blow hammer packed in a lightweight

carrying case. In addition to mounting bearings, the TMFT 36 is also suitable for mounting other

components such as bushings, seals and pulleys.

SKF PORTABLE INDUCTION HEATER

TMBH 1

The SKF High Frequency Portable Induction Heater TMBH

1 is a portable lightweight heater for heating bearings with

an inner diameter ranging from 20 to 100 mm (0.8 to 4

in) and a maximum corresponding weight of

4.5 kg (10 lb). The heater uses a patented method of

heating based on high frequency induction,

which provides optimised efﬁciency.

This method is very quiet and creates no magnetisation at all. In addition to bearings, the heater

can also be used for heating ferrous components such as gears, pulleys, bushings and shrink rings.

SKF GENERAL PURPOSE THERMOMETER THERMOPEN

TMTP200

The ThermoPen is a user-friendly, durable pocket size

thermometer. Its sturdy ﬂexible probe tip ensures effective

surface contact for accurate temperature measurement.

Since no maintenance engineer should work without one,

the ThermoPen is supplied with a handy pouch with belt

clip for protection and portability.

The ThermoPen measures the temperature of a wide variety

of industrial applications such as bearing housings and

gearboxes quickly and accurately.

 • Compact,ergonomicdesign

 • Widemeasurementrange,from-40to200°C(-40to392°F)

 • Temperaturereadingselectionin°Cor°F

 • Flexibleprobetipforbettersurfacecontact,providinghighmeasuringaccuracy

 • Dusttightandwaterresistant,ratedIP65

 • Maximumtemperaturefunctionallowstemperaturepeakhold

 • Autopowerofffunction

 • Ultralowpowerconsumption