Datasheet

PROJECTA ACADEMY
12
@
120° 1.0
100° 1.1
70° 
These projection surfaces are supported and used in
non-tensioned projection screens.
Screen surfaces features
Diffusion
Screen surface can be cleaned

Flame retardant
Gain; Indicates Goniophotometer reflectance readings.
The higher the number, the greater light transmitted to
the audience.
Mildew resistant
Number indicates the optimal width of the
ideal full viewing angle.
Reflective
Retro-Reflective
Diffusion
Transmissive
(rear projection)
High Contrast
This screen surface is a great choice when video images are the main
source of information being projected and where ambient light is
moderately controlled. With its specially designed grey base material
and reflective top surface, this screen material is able to provide very
good black levels without sacrificing the white level output. This is a
fiberglass-based surface.
Matte White
Matte White is one of the most versatile screen surfaces for precise
image reproduction that provides an exceptionally wide viewing angle.
Its versatility makes it a great choice for situations with good control
over ambient light and where an exceptionally wide viewing angle is
necessary. This is a fiberglass-based surface.
Datalux
This screen surface is specially designed with a reflective coating, which
provides an increased amount of brightness with a moderately reduced
viewing angle. The increased gain of this surface makes it suitable for
environments where ambient lighting is uncontrollable and a projector
with moderate light output is utilised. This is a fiberglass-based surface.
Color Neutral Matte White Matte White
Contrast High Contrast
High Contrast
Cinema Vision
Reflective Datalux Pearlescent
Rear Projection Retrotex Da-Tex
®
Feature
Projection Surfaces
Non-Tensioned Tensioned
Screen Surfaces
Non-tensioned Projection Surfaces
for Front Projection
40° 2.4
High Power®
This screen surface provides the reflectivity and optical characteristics
of a traditional glass beaded surface with the ability to clean the surface
when necessary. Its smooth surface provides the highest gain of all front
projection screen surfaces with no resolution loss. The moderate
viewing angle and its ability to reflect light back along the projection axis
make this surface the best choice for situations where there is a
moderate amount of ambient light and the projector is placed on a
table-top or in the same horizontal viewing plane as the audience. This
is a fiberglass-based surface.