Operating Instructions
Technical Specifications
Input Voltage: 9-16V DC
Maximum Current: 0.075A @12V DC
Maximum Power: 0.9W @ 12V DC
Operationg Temp: -22°F to 149°F
Storage Temp: -40°F to 185°F
Waterproof Rating: IP65
Wireless Frequency: 2.4GHz & Bluetooth 5.0
Wireless Range (RF Wifi): 98.4 Feet without interference or obstruction)
Wireless Range (Bluetooth®): 33 Feet without interference or obstruction)
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by ADC Solutions Auto, LLC is under license. Other trademarks and trade
names are those of their respective owners.
1x KEY PAD
1x Power Cable
1x M5 Screw (L50mm)
2x M6 Washer (OD:12mm / ID 6.5mm
2x M6 Nut
1x Keypad Button Sticker
4x 3M VHB Double Sided Tape
Includes
This PROJECT X product carries a Limited Lifetime warranty against defects in workmanship and
materials subject to the conditions and additional warranty information available at:
www.projectxoffroad.com/pages/returns-warranty
DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY
OF FITNESS FOR PARTICULAR PURPOSE: EXCEPT AS SPECIFICALLY SET FORTH HEREIN, NO
WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, IS MADE AS TO THE GHOST BOX.
PROJECT X AND/OR ITS AFFILIATES EXPRESSLY DISCLAIMS, WITHOUT LIMITATION,
ANY STATUTORY WARRANTIES AND ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PROJECT X
2975 Red Hill Ave., Ste.
100, Costa Mesa, CA 92626, USA
Warranty
Cautions
Check your state or provincial laws before installing. Vehicle owner must
comply with all applicable laws.
This product is intended solely for off road purposes. Manufacturer and Seller
assume no liability for installation or use, which are solely the responsibility of
the purchaser. This product is not DOT approved and is designed and
intended for off road uses only.
1. Do not install or use product if it, in any way, impairs the safe operation
of your vehicle.
2. Follow manufacturer’s instructions to ensure the product is properly
and safely installed.
3. Check your state or provincial laws before installing. Vehicle owner must
comply with all applicable laws.
4. This product is intended solely for off road purposes. Manufacturer and
Seller assume no liability for installation or use, which are solely the
responsibility of the purchaser.
5. This product is not DOT approved and is designed and intended for off
road uses only.
6. The Manufacturer and Seller are not responsible or liable for consequential,
incidental, or indirect damages, whether to person or property, resulting
from the installation or improper use of this product.